HXE4B - Battery Powered Open Frame Crimp Tool 1.5 Ton

• Accommodates "Y" Dies

The HXE4B Battery Powered Crimp Tool is a hand held, self-contained crimp tool intended to crimp copper and aluminum cable #26 to #8 AWG with DMC "Y" Dies (M22520/5-xx and others).

Dies in various crimp patterns are also available for insulated and uninsulated terminal lugs, wire splices and end caps relating to AS7928, MS17143, MS25036, MS25181, MS27429, MS25274, MS20659, M81824, MS21003 through MS21015, and commercial part numbers.  Several power contacts too large for conventional hand tools are also covered by interchangeable dies for the HXE4B.

Hexagonal crimp dies are available in a variety of combinations having single, double, and even triple cavity design.  These dies accommodate most coaxial and shielded connectors and contacts conforming to MILPRF-39012, AS39029, and numerous proprietary configurations.

The HXE4B meets the requirements of RoHS Directive 2002/95/EC.

FEATURES:
Ergonomic design allows one-handed operation
Die automatically opens when crimp is complete
Die can be retracted in mid-cycle to adjust connector
Head rotates 350 degrees
Red LED to display the current status of the unit

CRIMP CAPACITIES:
#26 to #10 AWG
Max. Crimp Force: 1.5 Tons (13.3 kN)
Avg. Crimp Time: 2 seconds
Avg. Crimps per Charge: 200 (Approx 400 with Extended Life Battery)

SPECIFICATIONS:
Length: 14.5" (368 mm)
Width: 2.87" (72.9 mm)
Depth: 4.5" (114.3 mm)
Weight (with battery): 3.18 lb (1.4 kg)
Sound Level: 75 db(A) at 1 meter
Vibration: <8.2 ft/s2 (2.5 m/s2)
Hydraulic Oil: Shell Tellus® T-15

TOOL INCLUDES:
Carrying Case
Two 18v, 1.5 A Batteries
One Battery Charger

BATTERY (P/N:  HDE-LI-B):
18 VDC, Lithium Ion, 1.5 AMP
Charging Time: 15 minutes
2 batteries included with each new tool

OPTIONAL EXTENDED LIFE BATTERY (P/N:  HDE-LI3-B):
18 VDC, Lithium Ion, 3.0 AMP
Charging Time: 30 minutes

VAC POWER ADAPTOR:
120 VAC  P/N:  HDE-120AC-A
240 VAC  P/N:  HDE-230AC-A

BATTERY CHARGER:
120 VAC  P/N:  HDE-LI-120C
240 VAC  P/N:  HDE-LI-230C